10/20 TON OBI PRESSES

The Kenco Open Back Inclinable (OBI) Mechanical press offers a tilt feature to allow scrap to fall out of a shoot by gravity. Typical applications for this press include stamping, blanking, coining, forming of sheet and tube, large terminal crimping, steel rule die, assembly (including swaging and staking) and automated work cells.

Available in 10 or 20 ton models, Kenco OBI Mechanical presses feature an exclusive full-revolution roller clutch, left to right drive, fully ground "V" slides and built-in parts counter ensure consistent, long term operation.

Other standard features of the Kenco OBI Mechanical Press include:

• One-piece Cast Iron Frame
• Crankshaft machined from stress-proof steel
• Motor (including motor mount, pulley and belts)
• Lockable Disconnect Switch with fuses
• Electric Anti-Repeat Control - 115VAC
• Top Start feature
• Stroke Counter with reset
• Dual Roller Bearing Flywheel
• Full Flywheel and Connecting Rod Cover
• Mechanical Drag Brake
• Fused Stepdown Transformer for 115VAC control circuit on 3 phase power*
• Magnetic Motor Starter with overload protection*
• Bench Legs for 10 ton, Floor Legs for 20 ton*

                  * not offered on Kompac presses

 

	101 - OBI	104 - OBI	201 - OBI	204 - OBI
Tonnage	10	10	20	20
Speed [spm]	175	175	130	130
Variable Speed	option (90 - 210 spm)	option (90 - 210 spm)	option (60 - 180 spm)	option (60 - 180 spm)
Clutch Type	roller clutch	roller clutch	roller clutch	roller clutch
Frame Opening	11.5" or 13.5"	10.75"	11.5" or 13.5"	12"
Throat Depth [frame to ram centerline]	5.625"	12.625"	7.75"	15"
Stroke Length	1.5" (option 2", 2.5", 3")	1.5" (option 2", 2.5", 3")	2" (option 2.5", 3")	2" (option 2.5", 3")
Ram Shank Diameter	1.56"	1.56"	1.56"	1.56"
Flywheel [dia. x width]	18" x 3.5"	18" x 3.5"	23" x 5"	23" x 5"
Flywheel Weight	175 lb	175 lb	350 lb	350 lb
Motor	1 HP	1 HP	1 1/2 HP	1 1/2 HP
Power Feed*	115VAC, 1F, 1 HP 208/230/460VAC, 3F, 1 HP	115VAC, 1F, 1 HP 208/230/460VAC, 3F, 1 HP	115VAC, 1F, 1 HP 208/230/460VAC, 3F, 1.5 HP	115VAC, 1F, 1 HP 208/230/460VAC, 3F, 1.5 HP
Bolster Plate	1" x 7.87" x 11.5"	1" x 7.87" x 11.5"	1.25" x 12.25" x 16.25"	1.25" x 12.25" x 16.25"
Floor Stand Weight	200 lb	200 lb	n/a	n/a
Overall Weight	700 lb	725 lb	1620 lb	1800 lb

* special motors / voltages upon request

Kenco also offers many options which will allow you to tailor the OBI Mechanical press to your specific manufacturing requirements.  These include:

• Variable speed controls to synchronize the press with auxiliary equipment
• Manual or automatic pump lubrication systems
• Oil or grease lubrication
• Heavy duty shielded palm switches
• Supervisory control of foot or two-hand actuation
• Supervisor control of single stroke or continuous operation
• Shielded foot switch
• Ram knockouts
• Worklight
• Bolster plate
• Floor stand (10 ton)
• Programmable Limit Switch for synchronization of feed and auxiliary equipment

Contact Taber Industries today to determine which Kenco Press is right for you!